I Rework my first AMS Guide. On the Pictures you can see the changes between the old and the new.
- the inner is more deep now
- i remove the side claws, some say they broke up and make latches for better fit
- the inner funnel fits the AMS Insert now
- tight Fitting and snugg fit
- redesign the part
- thinner walls to prevent collision with full Filament Spools
Printing:
- PETG or PET CF is Recomended.
- 0,4 Nozzle
- 0,2 Layer high (0,16 Not tested)
- First layer speed 30mm/s
- First layer Infill Speed 60mm/s or less
- Arachne Wall Generator
- In Developer mode set First layer flow to 1.08
- In some cases it dont fit, then you have a newer AMS Version, Please try to scale it to 102%
Install:
- put it from the AMS front button to the back (Spool) in
Should be a tight fit and snugg in with a little press force
Note:
If you have Problems with the size or fitment please let me know it to improve it. May be are the AMS Versions Different