joker why so serious (Hue forge)

my first one i hope u like it 

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The model is configured for optimal printing, if you want to scale it you can do so respecting the Z axis (thickness)

Filaments Used:
    Pla JAYO Black Transmission Distance: 0.3
    Pla JAYO Grey Transmission Distance: 2.5
    Pla GEETECH Grey Transmission Distance: 3
    Pla JAYO White Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #16 (0.76mm) swap to Grey
    At layer #28 (1.24mm) swap to Grey
    At layer #38 (1.64mm) swap to White for the rest.