Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x200.01mm in size. If you adjust the size don't adjust the z height.
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6.4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #20 (1.68mm) swap to Jade White for the rest.