This is a 5 color hueforge model. If you are using ams/ams lite just swap out one of the early colors for the white during the print. This model is also scalable, just don't change the Z height if you do scale it. I kept is small to reduce the slicing time and not offend the restrictions for model uploads.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA M3D Grey Transmission Distance: 2
PLA Bambu Tough Silver Transmission Distance: 3
PLA Spool3D White Transmission Distance: 3.2

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #9 (0.8mm) swap to Grey
At layer #12 (1.04mm) swap to Silver
At layer #18 (1.52mm) swap to White for the rest.