Textured Faces Series :
Stoned : https://makerworld.com/en/models/45876#profileId-47671
Sliced : https://makerworld.com/en/models/93257#profileId-99667
Stoned Again : https://makerworld.com/en/models/116838#profileId-125606
This model has been carefully designed to look great with 3 colors.
Only filament swaps! No AMS necessary.
This does not need an AMS to print, but it does make it easier.
If you have an AMS, print directly from the provided print profile.
If you don't have an AMS, open and slice in the Bambu Studio app and add pauses at the provided layer heights for filament swaps.
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.5
PLA+ JAYO Meta Grey Transmission Distance: 4
PLA+ JAYO Meta White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #6 (0.84mm) swap to Grey
At layer #9 (1.2mm) swap to White for the rest.