Split Shells - By default, the top and bottom shells are each designed to be printed as solid parts with filament swaps to create the lighthouse stripes. You can print these shells as individual layers that are glued together.
Extra Magnet - Glue a 3x3mm cylinder magnet into the metal dowel pin hole in the base so that the pin is held in place until the puzzle is given a slap. Make sure the magnet is pushed all the way to the bottom of the hole.
LED lights - Add temporary balloon LED lights to the lamp room for a nice glow. Lights last a couple days and can be turned on/off with a pull tab - https://www.amazon.com/dp/B07TMY9L3J
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
Changes:
I changed the bolt hole size to fit the larger counter sink bolts that I had azt home. I also reintroduced the old Moon Disk, as the newer one had issues with magnetizing the pin for me. Also I added a printable pin, that works well for me too.