"

• Supports: No
• Resolution: .1 - .2 mm
• Infill: Scaled 100% and lower --> 100% infill
• Notes:

Step 1 - choose a file - I added 4 sizes: 1x1; 4x4 ; 10x10 ; 23x23 (I can add more if you ask nicely) as well as the link/connector which you will need later - If it's you first time, start with the smallest patch or the single piece to make sure your printer is set up right.

Step 2 - choose your scaling - From 50% to whatever fits on your printing bed.
At 100% the individual links measure 11x11mm with 1mm space between them.

Step 3 - At 100% scale and below I'd recommend full infill - pro-tip: when using Simplify3D include a solid diaphragm every layer to ensure "real" 100% infill.

Step 4 - After printing, carefully remove the printer under the Fabric of Thyme™.

Step 5 - If it's not already awesome enough, wiggle around, throw it at walls, a little squiching and kneading until the single links can all move freely.

Step 6 - Do whatever crazy thing you have in mind!

Step 7 - Share a made - I would love to see what y'all can make out of this!"

https://www.thingiverse.com/thing:2990070