This model isn’t mine; it was created by @SKFactory and published on Printables.
Unfortunately, the print profile wasn't available, so I had to experiment a bit to find the best settings.
First off, I set the model to be printed with "variable layer height." While this made the print a bit slower, the results were definitely superior.
I also used Hilbert curves for the top layer finish to enhance the visual appeal.
When I saw that this file wasn't available on Makerworld and that the license it was published under allows sharing with attribution, I thought the work and testing I did could be useful for others, making it easier to print directly from the app.
As for materials, @SKFactory has done prints in TPU, which I haven’t tried yet. Given the design of this file, I’m sure it would work great in TPU as well, making this "skin" even more comfortable, especially for cosplayers.
Hope this helps!
Original url: https://www.printables.com/it/model/907384-dragon-skin-modular-400-pz
Printing Instructions
This model is super easy to print and doesn't need any supports or post-processing.
You can print it with a 0.4mm nozzle and a layer height of 0.2mm.
Material: PLA
Layer Height: Variable layer height
Wall generator: Arachne
Bottom surface pattern: Hilbert curve
Supports: NO