HUEFORGE LIONEL MESSI

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions: Start with Black

At layer #5 (0.48mm) swap to Gray
At layer #8 (0.72mm) swap to Beige
At layer #9 (0.8mm) swap to White for the rest.