this model is to assist in cleaning the outside of a window.

you will need:

2*M3 screws, 20mm

4*M3 nuts

2*M3 threaded inserts

4*washers

2*M4 screws, at least 30mm

2*M4 nuts

you can look at the pictures and see how everything is connected.

you should insert the threaded inserts from the underside

T nut converter part assembly:

M3 screw>nut>Tconverter>nut>washer

you can glue the parts with superglue and the washer to the rectangular fastener

the threaded insert is only ment for the wile itself

for the main wipe assembly:

M4 screw (preferably a T screw)>the ‘c' handle>nut

here i used the nuts like threaded inserts but you can wvwn just glue the screws to the handle and not use a nut at all.

there is a space to add a wooden broom stick and secure it with a screw