Swing lid for decorative office trash can by Every Day Counts

Every Day Counts

Household>Office

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 2 walls, 20% infill

Designer

4.8 h

1 plate

4.9(23)

0.16mm layer, 2 walls, 10% infill

Designer

6.3 h

1 plate

5.0(8)

Boost

110

211

486

214

Released

Description

Here is the swing lid attachment for my office trash can (model Decorative Office Trash Can)

NOTE: A flat-style lid is available at Flat Lid.

Comment & Rating (42)

@RIPrinting

Print Profile

0.16mm layer, 2 walls, 20% infill

printed perfect!

The designer has replied

@EveryDayCounts

Looks great in black. Thanks for posting the pictures!

@RIPrinting

Replying to @EveryDayCounts :

sunlu Gray Pla + thanks

@user_2857927862

Print Profile

0.16mm layer, 2 walls, 20% infill

Great little bin and lid! Slightly bigger than expected, but perfectly sized as a small wastebin for my home office. Photo shows the lid in action, swinging after a quick push. Tip - the pins for the hinge are a tight fit, but go in perfectly with a little pressure from something hard. I used the handle of a screwdriver.

The designer has replied

@EveryDayCounts

Thank you very much for the review, comments and the photo. I love the way that it looks in marble - very professional. Thumbs to your tip, too. I have done the same with a screwdriver. The joints are tight by design so that they do not loosen during usage and do not need glue.

@ShogiGT

Print Profile

0.16mm layer, 2 walls, 20% infill

(Edited)

@marciealana

Rocking! Prints easily and is remarkably robust.

The designer has replied

@EveryDayCounts

Thanks @marcielana. I'm glad that it worked out well for you. I really like how this lid works on my bin too. What colour did you print it in?

@marciealana

it was supposed to all be purple, but I had a goof. in the end it made a nice accent.

@EveryDayCounts

Replying to @marciealana :

I think that the colour combo rocks! It's groovy.

@pbrowning1980

Boosted

This is a great design and easy to print. I am partial to functional 3D prints and this model fit my needs. I did not need to tinker with the design to make it work or print properly.

@Anachan

Print Profile

0.16mm layer, 2 walls, 10% infill

perfecta

@martythiele50

Print Profile

0.16mm layer, 2 walls, 20% infill

epic print

@EinzelFall

Print Profile

0.16mm layer, 2 walls, 20% infill

fits perfectly for the trashcan

@cheungy69

Print Profile

0.16mm layer, 2 walls, 20% infill

Easy to print and even after scaling down it still printed flawlessly.

@Dizzydawgsmooch

Print Profile

0.16mm layer, 2 walls, 20% infill

it sits on top but doesn’t fit over the bin so it doesn’t fall off. Also it’s flimsy at the bottom and has a hard time getting it off the plate in tact. otherwise, super cute and a good idea.

(Edited)