Bambu Lab Scraper Grip by 3D-EXP

3D-EXP

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

resonably detailed and fast profile 0.16mm layer, 5 walls, 30% infill use 0.2mm for faster print

55 min

1 plate

4.7(73)

Regular print, 0.2mm layer, 3 walls, 15% infill

28 min

1 plate

4.6(29)

Boost

116

1 k

664

Released

Description

Bambu Lab Scraper Grip

bambu

grip

scraper

Comment & Rating (116)

@eZ_Bolek

The logo design is kind of bad... Layer 0,16 => First the logo is created in layer 57 to 58, then completely covered in layer 59 to 60, and then reprinted again in layer 61 to 62. That doesn't make any sense to me! Just a waste of time and materials... If you choose 0.2 layers, the problem is the same only at other layer heights.

(Edited)

The designer has replied

@3DEXP

The logo design is absolutely correct. For me it looks like you accidentally move logo objects slightly down.

@designbuild

Print Profile

resonably detailed and fast profile 0.16mm layer, 5 walls, 30% infill use 0.2mm for faster print

The fitment of the smaller hold down piece wasn’t perfect for me. I did take the time to pre-thread the holes in it with a screw before attempting assembly. Been using it for about 10 prints now and it has held up so far. I chose this design because it had a nice ergonomic handle, and after using it I can confirm that it does. The only things I would change are the mounting bracket and blade angle which seems a little too steep. The Bambu magnet isn’t very strong and was just a little too long to fit into the recess of the handle. A pair of scissors fixed that, however only to discover the magnet is really to weak to be of use. Not the designers fault but something you should consider and I would recommend testing the strength of yours first, to know what your working with.

@3DEXP

I was thinking about making these holes already threaded, but I withdrew from this idea because I am not sure what kind of screw the person who will print it will use. Regarding the magnet (it is actually weak), mine fit, which may mean that Bambu has a rather loose tolerance.

@user_3671062747

Print Profile

Regular print, 0.2mm layer, 3 walls, 15% infill

Lettering turned out as expected not sure why others are having problems

(Edited)

@dmb3d

Print Profile

resonably detailed and fast profile 0.16mm layer, 5 walls, 30% infill use 0.2mm for faster print

The best of the best scrapper

@user_3831069201

Print Profile

resonably detailed and fast profile 0.16mm layer, 5 walls, 30% infill use 0.2mm for faster print

super

@ToClose

Print Profile

resonably detailed and fast profile 0.16mm layer, 5 walls, 30% infill use 0.2mm for faster print

perfect!

(Edited)

@LAYERED

Print Profile

resonably detailed and fast profile 0.16mm layer, 5 walls, 30% infill use 0.2mm for faster print

This is one of the MUST HAVE tools for every 3D print enthusiast! It looks good next to other spare parts in my BaBo organiser. 😃

@rubywong121

Print Profile

Regular print, 0.2mm layer, 3 walls, 15% infill

it works

@Alaska.saedel

Print Profile

Regular print, 0.2mm layer, 3 walls, 15% infill

Nothing is possible without a spatula! And this one is awesome!

(Edited)

@PrintWorksCraft

Print Profile

resonably detailed and fast profile 0.16mm layer, 5 walls, 30% infill use 0.2mm for faster print

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.