Remixed by

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

Mighty 13 - Repaired - 0.16mm layer, 2 walls, 15% infill

2.1 h

4 plates

Open in Bambu Studio

Boost

Released

Description

Summary

Introducing Mighty 13!
Mighty 13 is an improved version of the MINI 13 figure. Mighty 13 is a posable, snap-together, jointed figure - now optimized for less use of supports, rafts, and unnecessary slicer add-ons. Mighty 13 can also be reliably printed in nearly all filaments, including PLA!

Printed in Prusament Azure Blue

v2 Updates
-Streamlined the entire design (eliminated overhangs, closed holes, etc)
-Fixed error with hands breaking

v1 Updates
-Added accessories
-Improved joint fit
-Added improved joints

This starter set contains everything you need to start printing, playing, and making it your own. You can find the MINI 13 figure I based this model off of below:

https://www.printables.com/model/422353-mini-13-printable-jointed-figure

Print Settings

Printer:

Doesn't Matter

                                            Rafts:                      
No

Supports:

                                            Resolution:                      
0.2mm or Lower

Infill:

20% - 80%

                Filament:                                     Doesn't Matter PLA, ASA, PETG, ABS, or Nylon                                    Doesn't Matter                    
                        Notes:                     
You may need to tweak these settings and find what works best with your printer.

Comment & Rating (2)

@sonjamichelle

Another thing I noticed. The hole for the foot joint is closed when printed. The peg for the joint can not be inserted. A couple of negative volume cubes can fix that (2.90x5.10x4.25). Once I'm sure everything is fine, I'll upload my print file with the fixes and the ability to choose colors by plate.

@sonjamichelle

When you split the Mighty_13_all_files_v2.stl file into parts in order to change the colors and separate the parts by plate/color there is an errant polygon that will throw an error when slicing. I am using BambuStudio 1.9.2.57. Once you delete that little bugger everything slices just fine.