This is a hueforge greeting card for mothers day.

first layer is translucent pink, “starry pink” td=10 that i have had for a while but you can change colors here to change the rose and stem color.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 110x132.51mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2.1mm and the Actual Depth is 2.2mm

Filaments Used:
PLA generic pink Transmission Distance: 10
PLA Overture Black Transmission Distance: 0.7
PLA Sunlu Matte White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with -Pink-Translucent (Med)
At layer #16 (1.36mm) swap to Black
At layer #21 (1.76mm) swap to White for the rest.