This is a mount for action cameras that can be attached to many surfaces using a variety of materials. There are holes that you can screw M3 bolts through, you could use velcro to stick it to a hat or other fabric, or you could use glue to attach it to a surface. You could even use string or rope tied through the holes.

The mount is designed with DJI Osmo Action and GoPro cameras in mind. It will fit both of the mounts that come with those two brands of cameras. All you need is an M5x18mm or longer bolt and a nut.

I use TPU to print these because it gives enough flexibility to where it won't break if whatever it is attached to is in an impact. Normal PLA would work if it is expected to be stationary, but other than that, I suggest using a stronger or more flexible material than PLA.

I print these mounts with 100% infill, 6 walls, and .25mm layer height to give them extra strength.

Looking for a TPU filament preset that prints with virtually no stringing, even with minimal drying? Check out my profile I have uploaded here: https://makerworld.com/en/models/451411#profileId-358459

I encourage you to share pictures of how you end up using the mount!

Enjoy!