Print at 100% infill with a layer height of 0.04mm with a base layer of 0.08mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Purple Transmission Distance: 1.5
PLA PolyLite Natural Transmission Distance: 21
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Steel Grey Transmission Distance: 1
PLA Bambu Lab White Transmission Distance: 6
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #14 (0.6mm) swap to Purple
At layer #16 (0.68mm) swap to Natural
At layer #24 (1mm) swap to Wine Red
At layer #31 (1.28mm) swap to Steel Grey
At layer #34 (1.4mm) swap to White for the rest.