I started to learn how to make bookmarks, and while still using hueforge. There is a negative shape in the print that allows for a hole on the top to put a tassle. It can be removed before slicing if you don't need it.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50.11x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Overture Space Gray Transmission Distance: 2.1
PLA PolyLite Pro Magenta Transmission Distance: 1
PLA Overture Matte White Transmission Distance: 3.7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Space Gray
At layer #11 (0.96mm) swap to Magenta
At layer #14 (1.2mm) swap to White for the rest.