Cap for PTFE connector that allows hold filament in it. This allows you to not need open whole dry box, if you want to put out the filament.
As default it must be printed from TPU material. Such cap can hold flexible or non-flexible filament types. Tested with Bambu TPU 95a HF.
There is also alternative solid version, that can be printed from any material, but can hold only non-flexible materials - you will not be able push through flexible filament.
Version | Printed from | Can hold non-flexible materials | Can hold flexible materials |
TPU(default) | TPU | Yes | Yes |
solid | any material | Yes | No |
There can be variations in dimenions for PTFE connectors. If the dimensions are too tight or too loose, feel free to open 3mf file in Slicer and adapt the scale of model.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.