A replica of 1,000 Yen customized with Hueforge ;)

Settings:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 199.99x101.36mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Matte Grass Green Transmission Distance: 2
PLA BambuLab Matte Latte Brown Transmission Distance: 1.9
This print uses 4 unique filaments

Swap Instructions:
Start with Charcoal
At layer #13 (1.2mm) swap to Dark Red
At layer #16 (1.44mm) swap to Grass Green
At layer #19 (1.68mm) swap to Latte Brown for the rest.