Bambu Lab X1C Start G-Code - Short Purge line

File: Bambu Lab X1C Start Gcode Short Purge.txt

• The start G-Code removes the default purge line in the top right hand corner and changes it to a short purge line in the bottom right corner of the build plate.
• Note: The start G-Code is for the Bambu Lab X1C.

File: Bambu Lab X1C Start Gcode No Purge.txt

• The start No Pruge G-Code removes the default (second) purge line in the top right hand corner.
• Note: The start G-Code is for the Bambu Lab X1C.

Both Start G-Code files tested on:

• Bambu Studio version 1.7.7.89
• Orca Slicer version 1.7.0 (Beta)

Instructions:

• Download the “Bambu Lab X1C Start Gcode Short Purge.txt” or “Bambu Lab X1C Start Gcode No Purge.txt” file.
• Copy all the text in the document.
• Delete all Machine start G-Code.
• Paste the copied text into the “Machine start G-Code”
• Save the profile under a new name.

If you found the G-Code helpful, please drop a like.

Disclaimer:

• Please use the start G-Code at your own risk.
• The G-Code was tested on my Bambu Lab X1C on both Bambu Studio and Orca Slicer.