Hueforge of Vault 111 Door from game Fallout 4
Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.
The Model is 180x109.6mm in size
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Print-me Lemon Drop Transmission Distance: 7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue Gray
At layer #9 (0.8mm) swap to Jade White
At layer #16 (1.36mm) swap to Black
At layer #22 (1.84mm) swap to Lemon Drop (Yellow)
At layer #28 (2.32mm) swap to Jade White for the rest.