Bambu X1/P1P/P1S Horizontal Side Filament Holder
Copyright Claim
Bambu X1/P1P/P1S Horizontal Side Filament Holder
Boost
367
642
151
Print Profile(6)
PLA - 0.2mm layer, 6 walls, 25% infill
Designer
2.1 h
1 plate
PETG - 0.2mm layer, 6 walls, 25% infill
Designer
2.1 h
1 plate
0.2mm layer, 3 walls, 25% infill
1.8 h
1 plate
0.2mm layer, 4 walls, 15% infill
1.6 h
1 plate
Click to see more
Boost
367
642
151
4
1.1 k
886
Released
Description
A easy print to enable wide spools to attach to the side of the Bambu X1 printer
No support is required, fits the bigger spools. I'm using it on all my Bambu printers now.
Fix with something like 2 off M3 x 20mm screws to secure.
Print at 0.2mm 30% infill / 4 wall
Hope you like it…. send over a boost if you can :-) Cheers ❤
Comment & Rating (151)
All
Print Profile
0.2mm layer, 3 walls, 25% infill
Well designed. Simple. I added electrical black tape to avoid dusting for some cardboard spools.
1
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
best solution to this problem without the need for external parts besides the two m3 20mm screws.
1
Reply
Print Profile
PLA - 0.2mm layer, 6 walls, 25% infill
Super fichier. Permet d'ajouter des bobines jusqu'à 2kg
0
Reply
Print Profile
PLA - 0.2mm layer, 6 walls, 25% infill
easy print and works great
0
Reply
Print Profile
PLA - 0.2mm layer, 6 walls, 25% infill
Good print, very usable
0
Reply
Print Profile
PLA - 0.2mm layer, 6 walls, 25% infill
The best model i've found
0
Reply
Print Profile
PETG - 0.2mm layer, 6 walls, 25% infill
ptfe tube keeps disconnecting but works great otherwise
0
Reply
Print Profile
PETG - 0.2mm layer, 6 walls, 25% infill
Good print that does what it is supposed to do.
0
Reply
Print Profile
PLA - 0.2mm layer, 6 walls, 25% infill
funktioniert super
0
Reply
Print Profile
PLA - 0.2mm layer, 6 walls, 25% infill
good holder
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (4)
Click to see more
Related Models
© 2024 MakerWorld