Hueforge print

Bambu labs 3d print from a 2d image. 

Swap Instructions:
    Start with black
    At layer #12 (1.04mm) swap to grey
    At layer #13 (1.12mm) swap to red
    At layer #14 (1.2mm) swap to orange
    At layer #16 (1.36mm) swap to yellow
    At layer #19 (1.6mm) swap to off white

    At layer #25 (2.08mm) swap to White for the rest.

 The Model is 222.25x200.82mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.5mm and the Actual Depth is 2.2mm
 

You may have to make other small adjustments with the hueforge model geometry section.

Made with a Bambu Lab X1C