Hueforge print of Rhea Ripley from WWE with frame so you can use it like a table photo frame or even hang on the wall !

REMEMBER TO DOWNLOAD AL THE 3MF → CLICK ON DOWNLOAD STL !

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA+ Sunlu Grey Transmission Distance: 2
PLA PolyTerra Muted Purple Transmission Distance: 0.3
PLA Sunlu Purple Transmission Distance: 6
PLA PolyTerra Pastel Peach Transmission Distance: 3.5
PLA Sunlu Meta pink Transmission Distance: 12
PLA PolyTerra Cotton White Transmission Distance: 2.5
PLA+ Sunlu White Transmission Distance: 5'

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Charcoal Black
At layer #10 (0.88mm) swap to Grey
At layer #13 (1.12mm) swap to Muted Purple
At layer #16 (1.36mm) swap to Purple
At layer #19 (1.6mm) swap to Pastel Peach
At layer #21 (1.76mm) swap to pink
At layer #22 (1.84mm) swap to Cotton White
At layer #26 (2.16mm) swap to White for the rest.

Glue the frame in the back and connect the supports with two 3x30 dowel pins:

https://www.amazon.com/Unifizz-Stainless-Support-Shelves-Silver/dp/B0CZLGY3B3/ref=sr_1_19?sr=8-19

If you want to hang it on the wall glue in the frame two sawtooth picture hangers like these:

https://www.amazon.com/Sawtooth-Picture-Hangers-Solutions-Paintings/dp/B07L2NSJ2B/ref=sr_1_3?sr=8-3