Hello, this is a custom made model inspired by similar solutions out there.
I found that those slide-in options were too tedious to use and had too many issues with rattling for my preferences, so I made a Magnetic Poop Catcher instead.

I find this option less of a hassel to use and slightly less noisy.
If you have issues with tolerance of the magnets on your printer, you can add paper pieces as a shim, or feel free to upload new print profiles.

Magnets Used:
10mm x 3mm

Print Settings:

• Manual Tree Supports, painted on underside of Attachment and Armature using Paint Bucket
• 6 Wall Loops
• 25% Infill (if not set to Gyroid, I suggest changing it to Gyroid)
• 0.2mm Layer Height
• 0.42mm Line Width
• Ironing Off

Print Order:

1. I suggest printing the Attachment first, ensure it fits okay.
2. Next, print the Armature, insert magnets south facing down. (if you don't know which side is N/S, you can download a polarity app on your smartphone.)
3. Use the Armature to match the magnets carefully, then when printing the Conatiner, it will be easier to insert them in the correct orientation.

If you run into issues with fitment of the Attachement & Armature, you can try using an knife or deburring tool and shave the sharp corners a small amount at a time and re-test fitment. (though, I was able to fit them together without issue)





Magnets Used:
https://www.amazon.com/VSKIZ-Refrigerator-Neodymium-Muti-use-Whiteboard/dp/B0C697TTK4/ref=sr_1_4?crid=2YF17JHUW2GPV&dib=eyJ2IjoiMSJ9.Ze0KHyIPHlClnspS_NF9-PxvdmxkYVHp2LV1I1Cl4OZb4dY0NelWDj58yHVmTDuRbFOMLfVx1EmQ_xTGsckURzbp4iMoh3f308EdV6RfJ3KAPgLwJSXV4I1m78cCTdgkZTNWvhZ2YA7GnceUd0nmyt7b8kxoKbVvLowmNPvahBRvszwkxef6balfOKPI5Otp27ruCC7_OFIAKFq-Dc6AQnBSue0BYDPnBGxvv6YqQlI.ZduO7D0atvFn59zgSnZmlckuiax2nkgBTY1MvlbdNtc&dib_tag=se&keywords=10mm+x+3mm&qid=1714341114&sprefix=10mm+x+3mm%2Caps%2C114&sr=8-4