Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is

• 200x135 mm plate #5
• 180x122 mm plate #4
• 160x108 mm plate #3
• 140x95 mm plate #2
• 120x81 mm plate #1

in size.

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.4mm

Filaments Used:
PETG Kingroon black Transmission Distance: 0.3
PETG Kingroon red Transmission Distance: 3
PETG Kingroon yellow Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:
Start with black
At layer #6 (0.56mm) swap to red
At layer #10 (0.88mm) swap to yellow for the rest.