Homing XDA keycaps - For 0.2mm Nozzle
Copyright Claim
Homing XDA keycaps - For 0.2mm Nozzle
Boost
68
100
4
Print Profile(1)
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
Designer
8.5 h
7 plates
Open in Bambu Studio
Boost
68
100
4
4
95
44
Released
Description
Finally, I can print decent keycaps on an FDM machine. And with a 0.2mm nozzle, you can as well!!
This model is designed and optimized to be printed using a 0.2mm nozzle. I haven't tested with other nozzle sizes. |
I bought a 0.2mm specially to print my own keycaps and was not disappointed. Those are textured homing keycaps for people who, like me, are learning to touch type. Have fun printing it and feel free to remix it!!
I recommend using a brim. Supports are not needed.
Comment & Rating (4)
All
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
For reference, I tried printing it with a 0.4 nozzle for curiosity here's a couple of pictures for reference!
Also next to a real keycap
0
Reply
Boosted
love these caps! tried all kind of keycap models before with .4 nozzle but nothing was just good enough to actually put them on a keyboard. thank you!
1
Reply
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
0
Reply
Boosted
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld