This is an action camera mount for the TBS Source One V5 fpv drone frame. It should be printed in TPU with the suggest filament preset below. PLA will break if you crash. I have not tested any other materials.

This will fit the GoPro mounts and the DJI Osmo Action mounts. Any M5 x 18mm or longer screw will work with this mount. The screw that comes in the box with the DJI Osmo Action cameras will fit.

Print with .25 layer height, 6 walls, and 100% infill to have extra strength for those epic crashes.

This has the best TPU Filament settings I have found that give virtually no stringing with the lowest amount of drying your tpu. To use these settings, you will need to open this .3mf file in bambu studio before printing, and then select to use the filament preset. Then you can save the preset for later use. If the filament profile does not show up, then you can download the filament preset in .json format by clicking download stl, then selecting the .zip file that contains the .json for the filament profile, downloading the actual .stl file does not give you the filament preset. Then import the .json to bambu studio through import configs under file in the top left of bambu studio.

Once the filament preset is saved to your bambu studio, you will be able to use it when you print this or any other profile from your phone. 

The profile was made using SainSmart TPU which has a recommended temp of 200 to 220, but will likely work with other brands of TPU with some adjustments to temperature if needed.  

This is the mount that I am currently using on my drone, which means I will update the profile and files with adjustments I find that improve this mount. I also encourage suggestions for improvement. Thank you!