If you want to hide unsightly or temporary wires from the wall, use "WireNook".
It is easy to apply, doesn't require double-sided adhesive tape, just simply roll the wires, place WireNook on top, and rotate it over the cable bundle.

If the wires are soft and flexible, then you can use two pieces of double-sided adhesive tape on WireNook's ears.

Easy-to-print, and does not require support.

If you liked the design/concept and found it helpful, please press the appreciation button. Thank you.

Printing Instructions:

Nozzle: 0.4
Layer Height: 0.2 mm
Top/Bottom: 4
Perimeters: 3
Infil: 10%
Support: No Supports (zero overhangs)
Material: PLA