Designed by Félix
Both the USB-C and USB-A versions are in the print profiles.
The optional charger clip to attach the winder case to the original charger brick is on plate 3.
Printing:
The winder case can print in place without support.
The power adapter clip is printed with support.
Assembly/disassembly:
- Align the core's cable hole with the ring's cable hole.
- Feed the cable through all the way, and clip the pad in place.
- Use the bottom handle to roll the cable up in the case. Keeping some tension on the cable while doing so can help.
- To disassemble, unwind all of the cable, and pop the charging pad out of place by pushing through the bottom hole.
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000445002/design/86575dfc-f4b5-4851-b1ce-4baffff83402.gif?image_process=format,webp)