Hueforge print of Cody Rhodes from WWE with frame so you can use it like a table photo frame or even hang on the wall !
REMEMBER TO DOWNLOAD AL THE 3MF → CLICK ON DOWNLOAD STL !
Filaments Used for Body_and_background:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA+ Sunlu Grey Transmission Distance: 2
PLA PolyTerra Fossil Grey Transmission Distance: 0.3
PLA Sunlu Meta White Transmission Distance: 8
Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Grey
At layer #13 (1.12mm) swap to Fossil Grey
At layer #18 (1.52mm) swap to White for the rest.
Filaments Used for Title:
PLA Sunlu Meta Black Transmission Distance: 1
PLA PolyLite Pro Metallic Gold Transmission Distance: 2
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Metallic Gold
At layer #16 (1.36mm) swap to Savannah Yellow for the rest.
Print the three .3mf then glue the Title to Body_and_background, you may need to do a little post elaboration, just a little trimming.
Glue the frame in the back and connect the supports with two 3x30 dowel pins:
https://www.amazon.com/Unifizz-Stainless-Support-Shelves-Silver/dp/B0CZLGY3B3/ref=sr_1_19?sr=8-19
If you want to hang it on the wall glue in the frame two sawtooth picture hangers like these:
https://www.amazon.com/Sawtooth-Picture-Hangers-Solutions-Paintings/dp/B07L2NSJ2B/ref=sr_1_3?sr=8-3
At the end color the holes in the title with red acrylic color.