适配 HadleyNeumo天文望远镜12mm管径的手机磁吸支架，用于搭配寻星软件进行寻星。榫卯结构，已预留公差，公差稍松，可使用胶水粘合。

磁铁适配magsafe，在淘宝或者阿里巴巴上搜索“无线充发射端磁铁”即可买到。切片需要设置在12层暂停，暂停后放入磁铁，建议在磁铁上涂胶，以防止耗材不黏附。我使用petg打印，热床温度为80度，隔着首层，磁铁温度不会超过80度，经测试没有消磁。

Adapter for HadleyNeumo Astronomical Telescope with a 12mm tube diameter, a magnetic smartphone mount for use with star-seeking software. Mortise and tenon structure, tolerances have been reserved, and the fit is slightly loose, allowing for gluing.

The magnet is compatible with MagSafe, and you can search for "wireless charging transmitter magnet" on Taobao or Alibaba to purchase it. The slicing should be set to pause at 12 layers, after which you insert the magnet. It is recommended to apply glue to the magnet to prevent the filament from not adhering properly. I used PETG for printing, with a heated bed temperature of 80 degrees. With the first layer in between, the magnet's temperature will not exceed 80 degrees, and it has been tested to not demagnetize.