This is a custom Hueforge of Daft Punk's Random Access Memories album cover. An AMS is required as the blue and yellow colours are sharing the same layers.
If you rebuild the hueforge from the stl follow these layer colour change but you'll have to pain one half different than the other to get the blue and yellow in the same print. If you want it to work like in my pictures, just use my print profile.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x183.75mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Marine Blue and Yellow
At layer #18 (1.52mm) swap to Ivory White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.