If you like my work, i'm open for donations via Paypal. It is much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.8
PLA BambuLab Basic Cyan Transmission Distance: 4.8
PLA BambuLab Matte Dark Matte Dark Red Transmission Distance: 1.6
PLA BambuLab Basic Yellow Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Cyan
At layer #17 (1.44mm) swap to Matte Dark Matte Dark Red
At layer #23 (1.92mm) swap to Yellow for the rest.