A cool 3D painting of an AI NieR: Automata cat.

Can be printed without AMS. Simply add pauses at the indicated layers after slicing and manually swap out the colors.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 171.5x171.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.3
PLA+ Esun Grey Transmission Distance: 2
PLA+ Sunlu Sunny Orange Transmission Distance: 8
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey
At layer #13 (1.12mm) swap to Sunny Orange
At layer #14 (1.2mm) swap to White for the rest.