HiroLmao

cover

IMG_0974_9892d424-bf2a-4d51-82d5-c2dc64d2b850.jpg

IMG_0974_efa29eb5-a20e-4f00-8f55-39840ccce228.webp

plate_1.webp

plate_1.png

Print settings AMS<ul><li>Print with PLA black and white</li><li>0.2 mm layer hight</li><li>lay it flat on the buildplate</li><li>use 0.4mm nozzle</li></ul>&nbsp;&nbsp;

0.2mm layer, 2 walls, 15% infill AMS black/white

Print settings “NO AMS”<ul><li>Print with PLA</li><li>0.2mm layer height</li><li>lay it flat on the build plate</li><li>no ams needed (single colored)</li></ul>

0.2mm layer, 2 walls, 15% infill No AMS white

A fan shroud inspired by a different fan shroud from Nier:Automata Fits all 120mm fans. To install use some fan screws you keep kicking around.  I printed this in PLA and it holds up fine. But be carefull! Dont place it near hot components such as your GPU… if you can even do that that is :)

Print Profile(2)

Description

Comment & Rating (0)

License

Related Models

120mm to 140mm fan adapter

Kirby Power Fan

Yuki Air Cooler

ASUS OC 1060 Shroud 2x 120 mm fan

120mm Flower Petal Fan Shroud