Holder 4x Tea Bag Dispenser by The Big Greek

The Big Greek

Household>Decor

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 10% infill

Designer

2.8 h

2 plates

5.0(12)

HQ - 0.12mm layer, 2 walls, 10% infill

Designer

5 h

2 plates

4.8(4)

Open in Bambu Studio

Boost

225

448

340

126

Released

Description

Holder 4x Tea Bag Dispenser

I would like to introduce you to my Holder 4x Tea Bag Dispenser.

This is an accessory for the Tea Bag Dispenser

Link: https://makerworld.com/en/models/438146#profileId-343486

The holder consists of a total of 5 parts, as everything cannot be printed in one go.

Parts:

2x holder
2x Insert
1x connector

On the upper side are recesses for the rubber stoppers of the dispenser, if you have installed any.
There are also some on the back so that the holder has a proper stand.

Assembly (also take a look at the following pictures)

first I would insert the inserts, if this is a little difficult, place the holder with the inserts on the head and exert a little pressure on the holder. Then the inserts should sit well.
now place both holders next to each other and press the connector into the opening provided for it, as before with the inserts. If the whole thing is too "loose" for you, use superglue to reinforce it.
finally glue in the rubber stoppers on the back and your Holder 4x Tea Bag Dispenser is ready to use

NO AMS IS REQUIRED

It works great for me.

If you like my work/project consider supporting me with these options:

leave a like
leave a comment
download the file
or buy me a Coffee

This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.

Have fun printing

TBG

tea bag brewing accessories

Comment & Rating (27)

@DeLeBaZoLo

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

@gbl.2k

Boosted

Super cooles Design! Hat mir sehr gut gefallen. Kannst du ein 2er mittleres Element machen, damit es "theoretisch" unendlich erweitern könnte? 👍

The designer has replied

@TheBigGreek

theoretisch geht das :-)

@gbl.2k

Boosted

Replying to @TheBigGreek :

würde mich mega freuen wenn du die Zeit dafür hast :)

@SlayerOne

Boosted

Wie immer, geiles Design :) Macht Spass das alles zu Drucken

The designer has replied

@TheBigGreek

Hast schon mehr von mir gedruckt :-)

@TheBigGreek

Danke :-)

@user_2354641748

what's the chance your squares are the same as gridfinity?

The designer has replied

@TheBigGreek

i think it's unlikely because i don't use the tool. but you can test it

@andreashafner

Hi, thank you for this nice Holder. Can you also design an Holder 2x please?

The designer has replied

@TheBigGreek

yes i will

@Kroopniock

Boosted

Great Design!

@B3N3D

Print Profile

0.2mm layer, 2 walls, 10% infill

Great design!

@purfabi

Boosted

Print Profile

HQ - 0.12mm layer, 2 walls, 10% infill

@Luke_94

Print Profile

0.2mm layer, 2 walls, 10% infill

@PBJJBL

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.