Bread bag clip -- print in place by RyGuy Design

RyGuy Design

Household>Other House Models

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

BagClips (both)

40 min

2 plates

4.9(46)

Bagclips - 0.2mm layer, 2 walls, 15% infill, A1 mini working

45 min

2 plates

4.9(9)

Open in Bambu Studio

Boost

111

252

361

346

Released

Description

This is a reupload of my own model from Cults3d, so please do not report it for copyright infringement.

Summary

This is a easy-to-print bag clip, that you can pop right off the build plate and use for all of your bag-sealing needs!
The springiness means it also doubles as a satisfying finger-pinching fidget toy,
It uses a print-in-place spring, and the unique design allows it to be printed without supports of any kind! I like to print it scaled up a bit (around 150%)

Works great in PLA, PLA+, PETG, ABS, and more.
No supports needed, but turn on bridge settings
Standard layer height, walls, and infill should work fine
If the parts are sticking together try printing the Looser Tolerance version.

Comment & Rating (63)

@user_2782379592

Boosted

Fantastically useful print! Works perfectly in PLA and survives the freezer without issue!

@J.Bro

Print Profile

BagClips (both)

Fast print, uses little filament and does what it’s supposed to. Many thanks

Show original

@user_2943047910

Boosted

Print Profile

BagClips (both)

just perfect!

@AndrewG07

Boosted

Print Profile

Bagclips - 0.2mm layer, 2 walls, 15% infill, A1 mini working

Great! I printed the one with the normal tolerance

@double78.tl

Boosted

Print Profile

BagClips (both)

👍

@anthonyvw2003

Works good

@Professor_Greed

Print Profile

BagClips (both)

@user_2424235484

Print Profile

Bagclips - 0.2mm layer, 2 walls, 15% infill, A1 mini working

@Jo90

Print Profile

BagClips (both)

the idea is great but I will remix it a bit to add additional strength to the low part under the opening. two of mine broke at this failure point. I printed them with PETG maybe PLA is better suited.

(Edited)