READ DESCRIPTION BEFORE PRINTING!!!
3D printing is democratizing the manufacturing process and turning the art of manufacturing into digital art.
- Avi Reichental, former CEO of 3D Systems
Why this project?
This project is born after a lot of research for an aesthetic case to store my LTT Scredriver bits.
After some (a lot) of print failures and (a lot of) wasted filament due to poor sizing of the models, I decided to make my own.
I wanted it to be tactile, to feel nice and have a nice look, while being extremely functional and practical.
I am really proud of this design, also because I do not usually make the models myself and I think it turned out to be really nice!
If you think it is nice as I do, please consider giving a good rating and a little support (I drink a TON of energy drinks!): https://buymeacoffee.com/scut00
Required hardware:
Instructions:
Before printing the project, I recommend to start by printing the tests to ensure that your printer is capable to print the right dimensions and have a good result.
The model comes with two plates, one with only the logo (0.2mm thick) and the other with the case itself.
If you want to print bi-color, but you don't have an AMS (like me) you have to print the first plate, only remove the purge line and nothing else, than start the next plate. Make sure not to move anything, otherwise you will break the magic trick!
If you only want to print with one color, just print the second plate.
Conclusion:
If you have any trouble, please feel free to reach out!