Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x182.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PETG JAYO Black Transmission Distance: 0.3
    PETG JAYO Gray Transmission Distance: 2.5
    PETG JAYO White Transmission Distance: 6
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Gray
    At layer #13 (1.12mm) swap to White for the rest.