Fully 3D printed backlit "poop" sand clock filled with your greatest multicolor printing experiences.

If you put UV LEDs inside or shine a UV flashlight the colors will stand out.

“By day, a simple sand clock. At night, a colorful Bambu world.”

Some manual print settings:

Glass print:

Part fan: 

• When print reach layer 950 part fan must go from 0% to 20%;
• When print reach layer 1000 part fan must go from 20% to 30%;
• When print reach layer 1150 part fans must go from 30% to 20%;
• When print reach layer 1200 part fans must go from 20% to 0%;

Aux. fan: Off

Chamber fan: 40%

Notes:

• Top part can also be used on base if lighting is not used.

If you have any questions, don't hesitate to ask.

Hope you like! :)