Optimized for 3D printing with a amazing depth of field.

The Glowing series is optimized with 2 filaments for the most popping effect when matched with glow in the dark filament.

It can be printed with either glow in the dark filament or with plain bambu lab green filament (without the glow in the dark effect)..

There are 2 print profiles available.

200x200 is optimized for x1c, p1s, p1p

150x150 is optimized for A1 mini.

Check out my frame options in the links below

https://makerworld.com/en/models/49964#profileId-51734

https://makerworld.com/en/models/40145#profileId-39785

Pictures can be printed with out AMS by following the print instructions below.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 6.9
PLA BambuLab Basic BambuLab Green Transmission Distance: 20

Swap Instructions:
Start with Charcoal
At layer #11 (0.96mm) swap to BambuLab Green for the rest.

Art generated with midjourney and optimized for 3D printing with Hueforge.