Gundam RX 78-2. 1/144 Entry Grade (test replica) by Hatta_3d

Hatta_3d

Toys & Games>Other Toys & Games

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 3 walls, 10% infill

Designer

7.2 h

3 plates

4.6(5)

0.16mm layer, 3 walls, 15% infill

Designer

8.1 h

5 plates

4.0(6)

SINGLE COLORED PARTS 0.12mm layer, 3 walls, 15% infill

Designer

8.7 h

7 plates

Boost

290

582

764

Released

Description

***NEW UPDATE***

After numerous requests received in recent weeks, i have inserted a new print profile dividing everything into single parts and adding 2 new print plates to split the black and white parts.

IF YOU LIKE IT SUPPORT ME WITH A NICE BOOST.

This is a replica of the famous Gundam RX

78-2.

I recommend printing it using the pre-set profile.

Please follow the instructions in the attached manual.

Instructions identical to the original model.

Documentation (1)

Assembly Guide (1)

977_139bc9d5-1faa-49c6-abc2-d931e408a9b9.pdf

Comment & Rating (75)

@ok29000

I really don't know where I went wrong，I didn't change anything. I have no courage to assemble...

The designer has replied

@ok29000

Supporting is too hard to tear.....

@Hatta_3d

They are small and detailed pieces, I chose the lesser evil they put the supports on “less visible” parts. As in this case the inside of the shield. If you want you can download the model and manage the media as you prefer in Bambu studio. But I have done various tests and I think this is the best solution.

@ok29000

Replying to @Hatta_3d :

I see. I think the problem lies with me....

@jaayjeee

Print Profile

0.16mm layer, 3 walls, 10% infill

The profile worked fine at 250% scale but supports were way too tight at the scale provided

The designer has replied

@Hatta_3d

Did you only print the head of the pattern? Because the image you attached doesn't seem to be my project.

(Edited)

@jaayjeee

yeah just the head, tried a bunch of the other parts at given scale and most of the supports were fused to the part

(Edited)

@Hatta_3d

Replying to @jaayjeee :

That's because I didn't publish the pieces individually. As soon as I have some time I will publish the pieces individually.

(Edited)

@markarig

Hi, I really like the model, but I seem to be missing one piece. It doesn't seem to be in the reds section of any of the parts lists. It goes in the middle of the.. boomerang? that's on it's head.

The designer has replied

@Hatta_3d

In the afternoon I check the file and if the piece is missing I'll fix everything. As soon as I solve it, it will be my concern to send you a message. The piece will have escaped me when I split the pieces.

@Hatta_3d

I added the missing red piece. try now to print the red part. thanks for you feedback.

@Hatta_3d

print the 3rd profile: single colored part.

@lawrencew009

Boosted

Print Profile

0.16mm layer, 3 walls, 10% infill

The black bits are tape holding some pieces together since I broke some of the pegs that are supposed to hold them together. I would recommend printing with a .2 nozzle as this model is very detailed. Along with scaling it some since I found it very hard to put a lot of the pieces together due to the tolerances being so tight with me printing without scaling them. It could just be issues on my end but overall I'm very happy with this model!