Is the garage of Bandai too expensive? You've found the right place!

（万代官方格纳库太贵了？你找对地方了！）

This is a Bandai gframe Yokohama RX-78-2 Gundam Garage 1:1 COPY. I paired it with a “RX-78-2 BEYOND GLOBAL” KNOCK-OFF model, which you can also put other HG 1/144 Gundam(GUNPLA) in.

（这是万达gframe横滨元祖高达的格纳库1:1复刻。我给他搭配了一个高高超越全球元祖模型，你也可以把其他 HG 1/144 高达模型放在里面。）

The left side of v1.0 is print in place version. The left side of v2.0 is an assembled version.

（v1.0左侧是一体打印版，v2.0左侧是组装版。）

If you print v1.0, just print" left main.stl, left move.stl, left stick.stl" for v2.0, replacing" Left_loose.stl" or" Left_tight.stl" for v1.0.

（如果你打印了v1.0，只需打印v2.0的left main.stl、left move.stl、left stick.stl，替换v1.0的Left_loose.stl或Left_tight.stl。）

Assembly tutorial（安装视频）：

V1.0 https://www.bilibili.com/video/BV1bZ421H7pU?p=2&vd_source=cc2d300f8e649a9b7c4790f073b8ddf5

V2.0 https://www.bilibili.com/video/BV1bZ421H7pU?p=3&vd_source=cc2d300f8e649a9b7c4790f073b8ddf5

V1.0's left side prints in place. Some software generated support effect is not good, I designed the support.

（v1.0左侧一体打印，部分软件生成的支撑效果不好，我设计了支撑。）

V1.0 Manual daub support diagram（V1.0手动涂抹支撑示意图）：

V2.0 Manual daub support diagram（V2.0手动涂抹支撑示意图）：