Ferret Face Art Hueforge
Ferret Face Art Hueforge
Print Profile(2)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 3.8mm and the Actual Depth is 2.6mm
Filaments Used:
PLA+ IIID Max Black Transmission Distance: 0.5
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ IIID Max White Transmission Distance: 5.6
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Grey
At layer #22 (1.84mm) swap to White for the rest.
Comment & Rating (14)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
