Edmonton Eskimo's - Retro CFL Hueforge
I have already done a hueforge for the Edmonton Elks modernized as well here:
https://makerworld.com/en/models/154459#profileId-168891
The rest of my Football (CFL / NFL / XFL) Hueforges can be found in this collection here:
https://makerworld.com/@CanadianGamer/collections/549656
-----------------------------------
If you're looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: https://www.patreon.com/CanadianGamer3DPrintsEDM
The pictured Frame is a friction Fit design here for 200x200 Hueforges
https://makerworld.com/en/models/381229#profileId-281475
In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
And if you scale it down, I have frames for 100x150 here:
https://makerworld.com/en/models/173529#profileId-190705
Please post a picture of your printed copy! I'd love to see it!
— Printing Instructions---
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA Bambu Basic Gold Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to BambuLab Green
At layer #11 (0.96mm) swap to Gold
At layer #18 (1.52mm) swap to Jade White for the rest.
-----------------------------------