Printed on an A1 Mini using bambu glow PLA. Layer Height of 0.20 mm, 3 wall loops. 20% infill.
Some adhesion issues on the first attempt but with a 3mm brim it printed fine. I also experienced slight problem with the articulation on the first, last, and one middle joint. Whether this was caused by the model or my settings, I'm not sure, but I was able to work each one loose with a few pokes from a small blade.
Hopefully a 2 ft, glow-in-the-dark danger will earn me some cool points with my nephew, though I probably should have used some sturdier settings given the destructive tendencies of 8-year-olds. I'll probably end up making another for myself, once I've given this one to him.