AMS lite Top Mount for A1 Remixed by emo飞机

Remixed by

emo飞机

3D Printer>3D Printer Accessories

Print Profile(1)

All

0.2mm layer, 4 walls, 20% infill

Designer

38.1 h

4 plates

Boost

Released

Description

注意：3MF文件仅用于参考摆放位置，请根据材料特性来调整参数。

AMS lite的重量放在了三角形的稳定器上，横杆仅用于限制Y轴方向的晃动。

装配需要18颗M3的螺丝，如果数量不足，最低也要8颗螺丝。螺丝的长度为8毫米到15毫米，都是可以使用的。

Note: The 3MF file is only for reference placement, please adjust the parameters according to the material characteristics.

The weight of the AMS lite is placed on a triangular stabilizer, and the crossbar is only used to limit the shaking in the Y-axis direction.

Assembly requires 18 M3 screws, and if the quantity is insufficient, a minimum of 8 screws are required. The length of the screw can range from 8 millimeters to 15 millimeters.

amslite

stand

support

Comment & Rating (8)

@levi_y

感谢大佬分享！！！ ams lite平放不容易掉落砸到机器非常好

(Edited)

The designer has replied

@Gloden_feng

很高兴能够帮到你我现在还在制作更多的收纳作品包括工具盒以及底座用于收纳扳手，喷子，铲刀，胶水，打印板等，希望能帮助你节省更多的空间

@user_1719342902

Hi, do you have the design for the reels?

@user_1719342902

Hi, I just bought an A1, I never print before. Can you tell me what type of filament I need to print your design. Thank you for your time

The designer has replied

@Gloden_feng

This is a component that requires a certain level of strength I am using PETG Placing the main stress surface on the XY plane And increased the thickness of the walls Suggest using PETG A1 may not be able to print other higher strength materials

@zackza

Please may we have a profile with just the Z axis Feet ? To stabilize our A1 without ams? Thanks!

The designer has replied

@Gloden_feng

I created a second creation based on official drawings If you don't need AMS and only need the drawings of the stabilizer, you can directly download the official drawings I don't know if I understand your question?