Tifa (FF7) - HueForge Print

Copyright Claim

Tifa (FF7) - HueForge Print

Boost
22
55
4

Print Profile(1)

All
P1P
P1S
X1
X1 Carbon
X1E
A1

Tifa 0.04mm layer, 1 walls, 100% infill
Tifa 0.04mm layer, 1 walls, 100% infill
Designer
5.8 h
1 plate
5.0(4)

Boost
22
55
4
4
19
10
Released

Description

I am very much #TeamTifa for Cloud, so this print was a no brainer.

 

This is a fairly simple print, just under 4 hours, with only 4 different colours. So only 1 AMS needed, or 3 manual colour swaps.

 

The included 3MF has all the necessary settings and filament swaps applied to the print if you use Bambu Studio. If you don't, or want to use your own settings - please use the STL and follow the instructions below! If you resize this print, please do not alter the Z height. Only alter the X and Y dimensions!

 

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

  • PLA BambuLab Basic Black Transmission Distance: 0.6
  • PLA+ Overture Dark Blue Transmission Distance: 4
  • PLA META Sunlu Teal Transmission Distance: 5.4
  • PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

  • Start with Black
  • At layer #20 (0.96mm) swap to Dark Blue
  • At layer #23 (1.08mm) swap to Teal
  • At layer #30 (1.36mm) swap to Jade White for the rest.

_______________________________________

If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!

_______________________________________

Comment & Rating (4)

Please fill in your opinion
(0/5000)

Print Profile
Tifa 0.04mm layer, 1 walls, 100% infill
0
Reply
Boosted
Print Profile
Tifa 0.04mm layer, 1 walls, 100% infill
0
Reply
Print Profile
Tifa 0.04mm layer, 1 walls, 100% infill
0
Reply
Print Profile
Tifa 0.04mm layer, 1 walls, 100% infill
0
Reply
No more