I am very much #TeamTifa for Cloud, so this print was a no brainer.
This is a fairly simple print, just under 4 hours, with only 4 different colours. So only 1 AMS needed, or 3 manual colour swaps.
The included 3MF has all the necessary settings and filament swaps applied to the print if you use Bambu Studio. If you don't, or want to use your own settings - please use the STL and follow the instructions below! If you resize this print, please do not alter the Z height. Only alter the X and Y dimensions!
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
Filaments Used:
Swap Instructions:
_______________________________________
If you'd like to support me, I now have a Patreon!
Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more!
If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!
_______________________________________